1.2GHz 40W RF Power Amplifier with Circulator – High-Output L-Band Transmit Stage for Private Microwave Relay, Drone Payload Data & Remote Industrial Control
Product Description
When 1160-1280MHz links need higher EIRP without replacing antennas or receivers, this 1.2GHz 40W RF Power Amplifier provides a practical transmit-path upgrade. It delivers 46dBm single-direction output with a circulator at the output stage, protecting the PA against antenna mismatch and reflected power. Designed for private microwave relay, drone payload data transmission, remote industrial control, and utility grid monitoring, it integrates through a 28V DC input, SMA female connector, and 15CM Red/Black Wire. Its 128*53*17mm aluminum housing weighs only 0.25Kg and uses passive cooling, making it suitable for pole-mounted, vehicle, and portable field deployments where high output and compact size are both required.
Typical Applications
- Private Microwave Relay: Reinforce one-way transmit links for enterprise and utility microwave networks.
- Drone Payload Data Links: Improve payload data transmission for extended-range UAV operations.
- Remote Industrial Control: Boost transmit signals for isolated controllers, actuators, and sensors.
- Utility Grid Monitoring: Extend transmit coverage for remote grid monitoring and fault detection.
- Port & Terminal Communications: Enhance one-way links for logistics, crane control, and terminal operations.
- Licensed L-Band Field Testing: Support higher-output experimentation and RF validation.
Technical Specifications
|
Parameter |
Value |
|
Working Frequency |
1160-1280MHz |
|
Output Power |
40W(46dBm) |
|
Operating Voltage |
28V |
|
Current |
3.2A@28V |
|
RF Connector |
SMA female |
|
Circulator |
Yes |
|
Shell Size |
128*53*17mm |
|
Net Weight |
0.25Kg |
|
DC Connector |
15CM Red/Black Wire |
Key Advantages
Circulator-Protected Output Stage. The circulator provides output isolation and VSWR protection, reducing the risk of PA damage from antenna mismatch and reflected power in field installations where environmental and antenna conditions change.
46dBm Single-Direction Transmit Output. This RF Power Amplifier delivers 40W(46dBm) in a transmit-only architecture, adding substantial L-band link margin for private microwave relay, drone payload data, and remote industrial control without increasing equipment footprint.
Compact 0.25Kg Chassis with 28V DC Integration. The 128*53*17mm aluminum enclosure uses passive cooling, while the 28V DC input, 3.2A@28V current draw, SMA female connector, and 15CM Red/Black Wire simplify integration into existing radio racks and portable systems.
What's in the Box
- 1 × 1.2GHz 40W RF Power Amplifier with Circulator