2.7GHz 40W RF Power Amplifier with Circulator – High-Power Transmit Module for Metro Cell Backhaul, Drone Detection Radar & Remote Telemetry Systems
Product Description
In the 2500-2700MHz band, metro cell backhaul, drone detection radar, and remote telemetry systems often operate under tight link budgets and unpredictable antenna conditions. This 2.7GHz 40W RF Power Amplifier delivers 46dBm single-direction transmit power with a circulator at the output stage, protecting the PA against antenna mismatch and reflected energy. It is engineered for metro cell backhaul transmitters, counter-drone radar uplinks, remote telemetry equipment, and private network infrastructure. The 28V DC input, SMA female connector, and 15CM Red/Black Wire simplify integration into existing radio installations. Its 128*53*17mm aluminum housing weighs only 0.25Kg and uses passive cooling, making it suitable for pole-mounted, vehicle, and portable field deployments.
Typical Applications
- Metro Cell Backhaul: Reinforce one-way transmit links for dense urban small-cell backhaul.
- Drone Detection Radar Uplinks: Improve transmit performance for counter-UAV radar and detection systems.
- Remote Telemetry Transmitters: Boost one-way telemetry links for distant monitoring and control.
- Private Network Infrastructure: Enhance uplink signal strength for private wireless networks.
- Public Safety Radio Systems: Extend transmit coverage for critical voice and data communications.
- Licensed High-Band Field Testing: Support higher-output experimentation and RF validation.
Technical Specifications
|
Parameter |
Value |
|
Working Frequency |
2500-2700MHz |
|
Output Power |
40W(46dBm) |
|
Operating Voltage |
28V |
|
Current |
3.2A@28V |
|
RF Connector |
SMA female |
|
Circulator |
Yes |
|
Shell Size |
128*53*17mm |
|
Net Weight |
0.25Kg |
|
DC Connector |
15CM Red/Black Wire |
Key Advantages
Circulator-Protected Output Stage. The circulator provides output isolation and VSWR protection, reducing the risk of PA damage from antenna mismatch and reflected power in field installations where environmental and antenna conditions change.
46dBm Transmit Output in a 0.25Kg Chassis. This RF Power Amplifier delivers 40W(46dBm) in a single-direction transmit path, adding substantial 2.5-2.7GHz link margin for metro cell backhaul, drone detection radar, and remote telemetry without increasing equipment footprint.
28V DC and SMA Female Field Integration. The 28V DC input, 3.2A@28V current draw, SMA female connector, and 15CM Red/Black Wire simplify integration into existing radio racks and portable systems, while the 128*53*17mm aluminum housing provides passive cooling and mechanical protection.
What's in the Box
- 1 × 2.7GHz 40W RF Power Amplifier with Circulator